Blog

Street light poles are essential for maintaining safety and security in roads, highways, residential areas, and public spaces. To ensure their longevity and effectiveness, regular maintenance is crucial. In India, where weather conditions, pollution, and infrastructure demands vary greatly, consistent upkeep is even more important. Below, we discuss some of the key maintenance requirements for street light poles:

 

Routine maintenance

 

Street light poles need regular care to ensure they function well and last longer. Routine inspections and cleaning are the first steps. Dirt, dust, and bird droppings on poles, fixtures, and lenses can reduce light output, so periodic cleaning is necessary. Vegetation or other obstacles around poles should be cleared to maintain proper light distribution. Inspections can also reveal rust, cracks, or loose bolts early on, which helps keep the poles sturdy and safe.

 

Structural maintenance

 

Structural upkeep focuses on preventing damage and deterioration. Rusted or corroded areas on poles should be treated with anti-corrosion paints or coatings to stop further damage. Loose bolts and nuts need to be tightened to keep the poles and fixtures secure. Cracks or physical damage, especially after storms or accidents, must be repaired promptly to avoid risks. Also, poles should be checked for tilting or leaning, as these can signal stability problems.

 

Electrical system maintenance

 

The electrical components of street lights require regular attention. Wires should be inspected for wear, exposure, or short circuits. Any faulty parts such as fuses, connectors, or control gear should be replaced immediately. Proper earthing of the poles is essential to prevent electrical hazards. Electrical boxes must be waterproof and sealed to keep out moisture and dust.

 

Lighting component maintenance

 

The lighting elements, including lamps and fixtures, also need regular upkeep. Faulty or dim lamps should be replaced to maintain proper illumination levels. Cleaning or replacing lenses and diffusers can enhance light output. Upgrading older fixtures to energy-efficient LED systems is a smart move, as it reduces electricity costs and improves lighting performance.

 

Preventive measures help extend the lifespan of street light poles. Periodic painting of poles, especially in humid or coastal areas, prevents rust and corrosion. Movable parts, if present, should be lubricated to ensure smooth operation. Checking the foundation stability is equally important. Issues like soil erosion or waterlogging around the base should be addressed to prevent weakening of the poles.

 

Looking for high-quality street light pole suppliers and manufacturers?

 

Explore our street light poles. They are designed to offer excellent quality and durability. Here’s what makes them stand out:

 

• Faster delivery: With a wide dealer network across the country, you get quicker access to our poles.
• Long-lasting protection: The poles are hot-dip galvanised using high-grade zinc (99.99%) to ensure a longer lifespan and resistance to rust.
• Superior coating process: A 7-tank galvanising method ensures the zinc adheres well to the pole’s surface.
• Smooth finish: Our single-dip galvanising technique provides a flawless finish, improving the pole’s appearance and durability.
• Strong and reliable joints: Segments are welded using the Submerged Arc Welding process.
• Enhanced security: Internal and external hinges are included to create an effective anti-vandalism system, adding an extra layer of safety.

 

Our street light poles combine advanced manufacturing techniques with high-quality materials, making them a reliable choice for urban and rural lighting needs. Their durability, fast delivery, and robust features ensure you get the best value for your investment.

 

Read more: Understand the cost of installing street light poles

...

India’s Smart City Mission, launched in 2015, aims to transform urban areas by incorporating sustainable and efficient infrastructure. Smart lighting is a crucial part of this initiative, helping to reduce energy consumption, improve public safety, and enhance the quality of life. Street light manufacturers are playing a pivotal role in supporting India’s Smart City projects. Let’s explore how:

 

1. Integration with smart city technology

 

Street lights are being integrated with smart features, such as sensors, dimming controls, and wireless connectivity. These lights can adjust their brightness based on real-time conditions, such as traffic flow or weather, significantly optimising energy usage. Also, connected street lights can be remotely monitored and controlled through centralised systems, allowing city authorities to detect malfunctions, outages, or energy inefficiencies promptly.

 

The poles supporting these smart street lights are equally important in ensuring the success of smart city infrastructure. Streetlight poles are being designed with durability and multi-functionality in mind. Manufacturers are using materials such as galvanised steel to make sure the poles can withstand India’s varied weather conditions. These robust poles are built to last, reducing the need for replacements and keeping maintenance costs low. Some are even equipped with anti-vandalism features to ensure the equipment remains secure.

 

In addition to supporting the lighting infrastructure, these poles are often designed to carry additional equipment such as surveillance cameras, environmental sensors, and communication devices. Many poles are wind-load certified, which means they can handle high wind speeds.

 

2. Supporting public safety and surveillance

 

They also contribute to enhanced public safety in Smart City projects. As mentioned above, manufacturers are embedding surveillance cameras, motion detectors, and environmental sensors into streetlight poles. The integration of these smart features provides a wide range of benefits to urban areas.

 

Surveillance cameras embedded in streetlight poles act as deterrents to criminal activity, helping to reduce incidents of theft and vandalism. Motion detectors contribute to enhanced public safety by automatically increasing the brightness of streetlights when movement is detected, creating a safer environment for pedestrians at night. Environmental sensors, on the other hand, allow authorities to monitor air quality and other environmental conditions.

 

3. Contribution to sustainable urban development

 

Sustainability is at the core of India’s Smart City Mission, and manufacturers are aligning their products with these goals. For instance, street light poles with mounts for solar panels are becoming a common feature in smart city developments. These streetlight poles not only help in reducing energy costs but also contribute to reducing carbon emissions. By harnessing renewable energy, they ensure that lighting is available even in areas with inconsistent electricity supply, promoting both energy independence and environmental sustainability.

 

The use of robust street light poles ensures that cities can maintain uninterrupted services, contributing to the long-term sustainability and efficiency of smart city projects.

 

Looking for information on trustworthy street light manufacturers in India?

 

Explore our street light poles. We offer comprehensive street light pole solutions. Our focus is not just on functionality but also on aesthetics, making our poles a beautiful addition to city streets. Our decorative lighting poles seamlessly blend form and function. They create visually captivating environments that elevate the look and feel of urban areas. We also offer sturdy CCTV poles, designed for optimal surveillance coverage. Our poles are built to support security infrastructure, ensuring that cities have reliable tools to keep residents safe. Our power distribution poles are designed to ensure reliable and efficient energy delivery across urban and rural areas, contributing to seamless electrical infrastructure. Flag poles add a touch of pride to public spaces, while our custom solutions are developed with an understanding of unique requirements.

 

...

Solar lighting solutions can help reduce the reliance on electricity by offering an energy-efficient alternative source. Solar street lights have also found great popularity, especially in industrial and commercial areas. They offer a wide range of benefits when installed in these zones specifically. Here, we discuss some of the advantages of solar lighting in commercial and industrial zones.

 

 

1. Energy efficiency and cost savings:

 

Solar street lights rely on the sun’s power. They can directly harness the energy from the sun. Photovoltaic cells are used to convert the light energy into electricity. The electricity generated by the photovoltaic cells is stored in batteries. This stored energy is then used to power the street lights during the night. The capacity of these batteries ensures that even on cloudy days or during longer periods of darkness, the lights can still function effectively. For commercial and industrial applications, the shift to solar lighting can lead to substantial cost savings. While the initial investment in solar lighting systems may be higher compared to traditional lighting systems, the long-term savings are significant. The primary savings come from reduced energy expenses, as solar street lights operate on power generated by the sun. Also, there are often government incentives, rebates, and tax benefits associated with the installation of renewable energy sources

 

 

2. Environment-friendly solution:

 

Unlike traditional lights that rely on burning fossil fuels, solar power is a clean and renewable source of energy. This means businesses that use solar lighting can reduce their greenhouse gas emissions and help fight climate change. In today's world, working towards sustainability is important, and solar lighting helps industrial zones align their goals with global efforts to combat climate change.

 

 

3. Grid independence and reliability:

 

For businesses operating in remote areas or those facing unreliable grid connections, solar street lights offer many advantages. Unlike traditional lights that rely on the main power grid, solar lights can keep industrial zones lit up even during power outages or disruptions. This reduces dependence on centralised power sources and makes operations less vulnerable to grid issues.

 

 

4. Minimal maintenance requirements:

 

Since there are no complex external wiring systems, solar street light poles are less susceptible to the wear and tear that can affect traditional street lighting systems. External wiring can be vulnerable to damage from environmental conditions, which can lead to power outages and require frequent repairs. Such a wiring system is absent in solar poles which significantly lowers these risks.

 

Also, the use of Light Emitting Diodes (LED) in solar street lights is another factor that contributes to their low maintenance requirements. LEDs are known for their durability and long lifespan, often lasting upwards of 50,000 to 100,000 hours. This is significantly longer than traditional lighting solutions. LEDs also maintain consistent light output over time, reducing the need for replacements and maintenance

 

 

Looking for a reliable and reputed solar street light manufacturer?

 

 

Explore our solar street lighting solutions and other products. We maintain the highest standards, conforming to IS-2713/80 (Parts 1-3). We have an impressive manufacturing capacity of 250,000 poles per year. Our poles feature modular designs for easy transport across challenging terrains. They are designed for easy installation and low maintenance. They have high corrosion resistance and can withstand harsh weather conditions. We use the best-in-class steel from SAIL and TATA, with a finishing touch of hot-dip galvanisation in zinc from Hindustan Zinc. Our excellence in logistics management and committed after-sales support, help us meet and exceed our customer’s expectations.

...

Street lighting is often taken for granted, but its absence can lead to serious social issues. The lack of street lights can result in areas being shrouded in darkness, making it easier for criminals to operate. This can lead to increased crime rates, putting the safety of ordinary people at risk. In this article, we'll explore how the absence of electric street light poles can contribute to a rise in criminal activity.

 

 

 

1. Visibility and deterrence:

 

Consider the case of a thief attempting to case out a jewellery store under the cover of darkness. In this scenario, the criminal can move confidently and unseen. However, once light is introduced, the situation changes drastically. Every movement and action is now subject to scrutiny. The element of surprise that is so crucial to a criminal's schemes is now compromised, which in turn leads to increased fear and the potential for exposure.

 

Darkness provides an opportunity for potential criminals to engage in unlawful acts without being noticed. On the other hand, adequate street lighting can discourage criminals from committing crimes as they risk being identified and facing consequences.

 

 

2. Fear and perception of safety:

 

Proper street lighting is crucial for the safety and security of residents. Inadequate lighting can create an environment of fear and danger, making residents feel vulnerable and constantly on guard. This can lead to a lack of social interaction, as people are less likely to venture out after dark, ultimately leading to feelings of isolation and loneliness. By ensuring that streets are well-lit, a safer and more welcoming environment for all residents can be created.

 

 

3. Social cohesion:

 

Social cohesion is when all residents in a particular community or area come together to share the responsibility for each other’s safety. This is possible when the area is well-lit and visible to all surrounding residents. In such a case, a resident can report suspicious activity in the neighbourhood because the activity is easily visible even from indoors.

 

 

Looking for information on high-quality street light poles for your next project?

 

Explore our street light poles. The poles are hot-dip galvanised using special high-grade zinc (99.99%), ensuring a longer lifespan. This durability is further enhanced by a 7-tank galvanising process, which provides superior adhesion and uniformity. Also, the single dip galvanising process results in a more refined finish. The structural integrity is increased by segments welded through the submerged arc welding process. Furthermore, the inclusion of an external/internal hinge system enhances their anti-vandalism properties, making Utkarsh Street Light Poles a reliable and secure choice for lighting needs.

...

Street light poles are very important for road safety. They increase visibility, enhance safety of pedestrians and direct the vehicles on a straight path.  It is important to gauge if the light pole is suitable for the area it is being installed in and its functionality should be monitored regularly. Discrepancies can lead to severe damage or hamper the safety of passers-by. Therefore, it is important to carefully consider the factors mentioned below while selecting and installing street light poles.

1. Height of the pole:  

Usually, a lighting survey is carried out to understand the optimum height of the pole that can be used to illuminate the desired area. This survey also takes into consideration the number of light fixtures required for each pole, the luminaire models and the number of poles required for the surveyed area. The height of the pole is usually determined by the following:

Width: The height of the street light pole is directly proportional to the width of the road.

Traffic: The height of the street light pole also considers the vehicle density experienced by the road. For instance high-end street lights are required for roads that are frequented by heavy vehicles. For lighter traffic, low level street lights are installed.

Spacing between street lights: Usually, the distance between street light poles should be 3-4 times the height of the poles.

Utkarsh India offers poles between 3 metres to any size as per customer specifications and design requirements. The poles are engineered with the finest raw material that guarantee longevity, strength and efficiency.

2. Speed of wind and other environmental factors:  

   
   

When selecting road safety structures such as street light poles, it is important to consider climatic factors, especially the speed of the wind. The large size of these structures can cause significant damage to vehicles, pedestrians, and the road in the event of any failure. To prevent such occurrences, local authorities should collect data on the regular wind speed experienced in the area, enabling the installation of the appropriate sized pole. Flat terrains are prone to harmonic vibrations caused by the wind, necessitating preventative measures to mitigate associated risks. Improper installation, with components not in their intended positions, can also result in harmonic vibrations, rendering the structure unable to bear its original load. Street light poles in locations such as bridges, airports, open fields, highways, and high traffic areas are more susceptible to extreme vibrations from the wind. The use of high-quality street light poles can effectively reduce the risks associated with failure of the structure due to harsh weather conditions,

When installing the street light poles, you need to consider the environmental factors such as storms, rain or snow. Street light pole requirements vary between flatlands and hilly areas. Near coastal areas, the street light poles are exposed to heavy salt content in the atmosphere which can cause potential corrosion. This type of corrosion is also called saltwater corrosion. The poles should be coated with protective layers to increase their lifespan. This enhances the durability of the poles and they last for years without visible damage or deterioration.

The street light poles manufactured by Utkarsh India undergo a deflection test. The test measures the amount of deflection or bending that occurs in a pole under a specified load. It is an important test to ensure that the street light pole is able to withstand the weight and stress that it will be subjected to during its lifetime.

3. Light consistency:  

The street light poles should be placed at consistent intervals. You need to ensure that the height of the poles are equal and consistent so that the road has uniform lighting. It is important to mount the light higher up the poles so that drivers inside the vehicles do not have to deal with glares. Their eyes do not have to adjust constantly while driving. With the improper placement of street light poles, drivers have to face considerable difficulty and can have visual impairment. It also makes it difficult to spot objects from far away and can cause accidents at night.

4. Aesthetic appeal:  

   
   

Street light poles not only provide illumination but also have a positive impact on the aesthetics of roads. A consistent and well-designed street lighting system on highways is one of the reasons why people enjoy evening drives. It enhances the visual appeal of the roads and the surrounding area. Therefore, it is important to choose the right street lights that complement the surroundings. Street lights can also be used to highlight major landmarks or buildings of historical importance, as well as to lead the way to business areas or residential neighbourhoods. By adding unique features such as fountains, gardens, or statues, street light poles can further enhance the aesthetic appeal of the roads.

Utkarsh India has supplied its street light poles to various clients. For instance, Utkarsh India has supplied 21,000 swaged tubular poles, 7 metres and 8 metres in height, for Bharat Broadband Network Limited (BBNL) in Nanded, Ahmednagar, and Nagpur in Maharashtra, and Uttarakhand. We are also awarded as one of the Top 10 Poles Manufacturer in India 2023 - March 2023. Our poles are designed by experienced chartered engineers as per requirement, We design the poles as per ASCE/SEI 48-05, design as per national & international codes. To know about the types of street light poles we offer or if you want to know about our solar street light with pole and battery price, get in touch with us.

...

Solar street light masts are engineered structures that are designed to support single or multiple solar luminaires. These masts may also be used to support roadway signs, banners and CCTV cameras. They are also used for power distribution.

Solar street light masts are versatile and are used across different industries - hence,  there are many factors to be taken into account before selecting solar masts for industries. As a solar street light pole manufacturer, we share with you some important factors to be considered before selecting solar mast for industries:  

1. Function of solar mast: The primary function of a solar mast is to support the weight of the luminaire. But at the same time, it must resist the wind and other environmental forces that it may encounter during its expected design life. At the time of selecting a solar mast, it is important to understand the operating environment of the mast and an engineering analysis must be done to ensure that the mast is up for the task. Our street light masts are manufactured as per BIS 875 Part III and ILE TR7. This means they can withstand 300 kmph wind speed.

2. Mounting height: The mounting height of the mast is decided by the number of poles to be installed, the kind and number of luminaires to be mounted. The type of luminaire model is decided by lighting consultants who survey the area that needs to be illuminated. 

3. Wind speed (in mph): Before a solar mast for industries is selected, it is important to factor in the wind speed that the mast will be exposed to. If the area falls in between two wind zones, the higher value should be considered. We use IIT-approved design software to conduct wind tunnel testing to check the aerodynamic performance of the mast.  The testing checks the solar mastâ€�"�s structural design and the design of the foundation.  

4. Pole material: Solar mast for industries is made of different materials such as steel, aluminum concrete and cast-iron.  Given the high tensile strength of steel, itâ€�"�s the most common material to be used. We manufacture solar masts for industries using the TATA or SAIL steel. They are hot-dip galvanised in zinc for long lasting life. The zinc is sourced from Hindustan Zinc Ltd. 

5. Design requirement: Round and square cross-section masts are the most common. However, city planners and urban developers often request for designer masts that are aesthetically appealing. 

6. Operating conditions: Special consideration must be taken for job sites near coastal areas. Corrosive operating conditions may require solar masts to be applied with extra coating. 

Looking for a Solar Mast for Industries?

As a reputed solar street light pole manufacturer, we offer masts and poles with mounts for solar panels that are engineered as per your customisation. We are the first company in entire eastern India to be BIS Licence holder of IS: 2713. We have over 18 years of experience in  manufacturing high mast  and poles. We are a trusted name in the infrastructure sector because: 

• We have an in-house facility for designing and customisation. 

• We have in-house labs for quality testing. 

• We use IIT-approved design software. We also offer design and drawing support. 

• We have an all-over India distribution network. We ensure faster delivery as we provide service for logistics and freight service to our customers. 

• We ensure quality assurance at the time of manufacturing and also follow safety protocols at the time of dispatch. 

• We also provide after sales service, with a 1-year service. 

To know more about our solar masts, contact us. ...

The focus of sustainable architecture is on building designs that use materials and construction methods that reduce the impact of development on the environment during construction as well as once the building is in use. Landscape, energy management, and stormwater management are just a few of the factors that are taken into consideration. As a reputed solar street light pole manufacturer, we share some of useful insights on sustainable architecture:

1. Passive sustainable design: Passive sustainable design means using natural elements to keep buildings comfortable. This is done to reduce power consumption. Designing the building as per sun orientation and local climate conditions helps in thoughtful door and window placement.  For instance, in some locations, large windows, doors, and skylights can help the users and residents better manage daylighting and natural ventilation, reducing energy needs for the building. Passive sustainable design strategies need to be planned before the construction of the building starts. 

2. Active sustainable design: Active sustainable design strategies involve the efficient HVAC, electrical, plumbing and other systems. For instance, a smart HVAC system adjusts the temperature of each part of the building based on the demand. Therefore, an empty room wonâ€�"�t be heated all the time. 

The electrical strategies will include:  

• The use of LED lights 

• Motion sensors 

• Use of dimmer switches 

The plumbing strategies will include:

• Installing low-flow faucets and showerheads

• Insulating water pipes so that they donâ€�"�t take much time warm-up 

• Opting for an energy-efficient tankless water heater that instantly heats water

3. Renewable energy systems:  Passive sustainable design and renewable energy systems usually go hand in hand. Renewable energy design strategies include ideas that help harness solar and wind energy. Some of the renewable energy strategies include:  

• Use of solar lights and solar heating systems

• Use of wind turbines to improve indoor air quality

• In certain situations, hydro power can be more viable as a commercial energy source than fossil-based energy 

4. Green building materials:  The use of green building materials can reduce a building project's environmental impact.  This is why materials such as fly ash bricks, steel, lumber, bamboo, cordwoods and insulated concrete forms are used for construction as well as interior decoration. It is also important to avoid materials that contain toxins. When it comes to paint and sealants, choose the ones that have low volatile organic compounds (VOCs). 

5. Native landscaping:  By planting trees and grasses that are native to the area, the air quality can be improved without the need for too much watering, fertilisers and pesticides. Landscaping can also be used as part of a passive energy strategy. 

6. Stormwater management: In urban areas, stormwater management is very important as the water runs off into roads and sewers. When stormwater management strategies are in place, the water is absorbed into the soil. The water helps in replenishing the underground aquifers. Water detention ponds, rainwater harvesting, green roofs and constructed wetlands can help rainwater from running off. 

Looking for a solar street light pole for your project?

Utkarsh India is a trusted name. As one of the reputed street light pole manufacturers, we offer street light poles with mounts for solar panels. We also offer conical poles, steel tubular poles, and street light poles. We are a trusted name in the infrastructure sector and have more than 18 years of experience in manufacturing High Masts & Street Light poles. Our high masts are used for large area illumination, stadium/sports area, flag masts, street lighting, transmission poles, solar/digital/wi-fi, and road signage/signal. To get a quote on high mast light pole installation or other products, call us

...

Countries across the world are attempting to harness the power of solar energy, so that it can be used as a viable source of electricity and the carbon footprint can be reduced. In India, several government and private initiatives are being taken to leverage the power of solar energy. In many metro cities, street lights are powered by solar energy. But do you know that the use of solar energy dates back to as early as 7th century B.C? As one of the leading solar street light pole manufacturers,

We have curated some interesting insights into the history of solar energy:

• Humans used burning mirrors to light fire

In the 7th century B.C, humans used the magnifying glass to light fire using the rays of the sun. In the 3rd century B.C. too, the Greeks and Romans used magnifying  glasses which were often referred to as burning mirrors. 

Burning mirrors were used to light fire by the ancient Romans and Greeks. The mirrors are arranged in a way that they focus sunlight on a point, which ignites the wood or other material that is placed there.

• Sunrooms were used to keep the house warm

Today, glazed sunroom extensions are quite common in residential spaces. They add light and value to your home. It is the early use of solar energy that gave birth to the concept of sunrooms. During Roman times, sunrooms were used to direct sunlight into one particular area. Even the famous Roman bathhouses were used as sunrooms. The idea was to capture the suns warmth during winter. 

• The first tactical solar cell was invented in 1954

Although several scientists worked on solar cells, they were too inefficient to be put to use. It was only in April, 1954, researchers came up with silicon solar cells that could be used to power an electric device for several hours of a day.  

• Solar panels were used in the outer space

In 1958, the Vanguard I satellite used a small solar panel to power its radios. Later, many satellites had solar panel technology on board. Not just that, in 1964, the first Nimbus spacecraft was launched. The satellite was able to run entirely on a 470 watt solar array. 

• The solar powered airplane

In 1981, the first solar powered aircraft flew across the English Channel from France to the UK. It was in 2016, that solar-powered aircraft called Solar Impulse 2 flew around the world without a drop of fuel.  

Looking for modern street light pole design for your project? 

We offer street light poles with mounts for solar panels. We also offer conical poles, steel tubular poles and street light poles. You can also check out designer lighting solutions  that come with decorative embellishments. Here are some reasons why are trusted trusted name in the infrastructure industry: 

•  We have 4 in-house 12.5m long Hot Dip Galvanizing facilities. We only use Special High Grade Zinc spruced from Hindustan Zinc Ltd. 

• Our in-house testing facilities ensure standard coating and the best finish at all times.  

• We keep over 1000 MT poles in ready stock, with over 1000 MT in ready stock of Pipes of different sizes to allow us to execute your orders timely without any delay to your project. 

• The poles undergo strict quality checks during production and before they are  dispatched. 

• In the Transmission and Distribution sector, we are the largest manufacturer and supplier of Steel Tubular poles as per IS 2713 in the country and outside the country. We also manufacture non standard size steel tubular poles as per customer requirement.

  
  

To know more about our range of products, contact us.  ...

Street lighting poles have a significant impact on how the road scheme looks. Thus, they should be chosen carefully - the selection process needs to be a part of the overall design concept from the starting point. To achieve the best possible outcomes, it is important that you buy street light poles from a reputed manufacturer.

If you are looking for a street light pole manufacturer in India, here are some useful insights:

Question 1: What type of light is used in street lights?

Some of the common types of lights used are:

• Metal Halide Street Lights: Most streetlights use metal halide bulbs. Other than street lighting, metal halide lamps are used for parking lots, stadiums, factories, and retail stores. They emit very bright light. 




• High Pressure Sodium (HPS) Street Lights: They are the most commonly used street lights in many countries. They produce bright light and are quite efficient. These lights are preferred because they are low maintenance. However, they take a few minutes to turn on completely.




• Low Pressure Sodium (LPS) Street Lights: These lamps work like the HPS light. They produce yellow and warm yellow light. While this light is very efficient, it takes a few minutes for the bulb to turn on completely.




• Light Emitting Diode (LED) Street Lights: LED lights have become quite popular. Unlike traditional lamps, these lamps switch instantly and emit bright light. They also help in making significant energy savings.

We offerconical poles, polygonal/octagonal poles, steel tubular poles that can be customised as per your requirements for power distribution, illumination and signage.

Question 2: Questions you should ask the selected street light pole manufacturers in India? 

• What is the height of your street light poles?

The height of the street light pole should provide sufficient light without there being excessive glare. Usually, a pole�"�s height starts from 2.5 meters & can go up to 16 meters as per requirement.

• What industry standards do you follow? 

The general requirement for steel tubular poles is minimum tensile strength of 410 MPa and 540 MPa.

Our streetlight poles conform to standard IS 2713:1980, that means they can withstand all kinds of shocks, cyclones and thrust line breakages.

• Do you offer customized poles? 

We offer poles that can be designed and customised to meet the different demands of architects, engineers and planners. We can design street light poles as per customer and design specifications. We have in-house testing facilities to carry out tests such as Drop Tests, Deflection Tests, Permanent Set Tests and other tests. Inspection and test plans are specially customised for each product.

• Do you supply street light poles to just India or other countries too?

We deliver across India through a country-wide dealer network & outside of India (Nepal, Bhutan, Bangladesh & other countries too)

Question 3: What are some common factors to keep in mind when selecting a good street light pole manufacturer?

Some of the important factors that you must consider are:

• Manufacturing facility: When you are looking for a street light pole manufacturer, itâ€�"�s important to ensure that their manufacturing capabilities are such that they can meet your requirements.

• Testing: The manufacturer must have in-housing testing facilities to ensure that the poles are made in a stringent quality control environment.

• Approvals: The manufacturer must have specific approvals as per the project.

We supply street light poles across India. We offer Conical Pole, Polygonal/Octagonal Poles and Steel Tubular Poles. We offer lighting poles starting from 3 meters to any size as per customer specifications. They also have a better anti-vandalism system. To know more about our products, get in touch with us.

...

Public spaces are a part of the culture of a city. They provide people opportunities to come together and engage as a community. However, for public places to promote a sense of inclusiveness they must be designed as per the growing needs of the city as well as the local culture. As a reputed designer light supplier, we share with you useful insights on creating vibrant public spaces

1. Keep it simple and adaptable
   When you are in the initial stages of your project it is important to keep the design of the public space simple and adaptable. The reason being public spaces are always evolving. For instance, In Indian metro cities since the metro train has come the public life is getting more centered around transit routes and metro stations.  Therefore, a good design should be one that can be later on changed.
2. Make it inclusive for everyone
   A good public space should not just be welcoming and aesthetically pleasing but it should be accessible to all. This means public space should be designed in a way that it is safe and finding  the way around isn’t difficult.  Pavements and signages should be there to improve accessibility. A good public place enables everyone, including people with physical disabilities, to move around the city safely.
3. Create multi-use spaces
   Spaces function differently at different times of the day. Public spaces can be designed in such a way that they can be used in multiple ways at different times of the day. For instance, a city square can integrate the market, culture and food.  It can be used by retailers and food vendors to do their business and at the same time, artists can use it to showcase their talent. Skyline, pathways with sitting arrangements, parks and cultural centres are some vibrant public spaces.
4. Install designer street lights
   Although the primary purpose of street lights at night is to provide illumination for security and safety, street lights are an important part of the character of the city. Illuminating the city squares, archways and areas outside retail stores calls attention to the uniqueness of a place. This brings a sense of drama to the experience of being in such places.
5. Choose durable and simple materials
   When you choose materials for designing public spaces, they should be defined by the simplicity of design and layout as well as quality. To choose appropriate materials, you must bear the following things in mind:

1. Choose materials that have a lower carbon footprint. As public spaces are high-traffic areas, use materials that can be replaced easily.
2. To focus on quality and cost, chalk out a detailed plan.
3. Make sure that material is chosen keeping design and aesthetics in mind.

Looking for designer street lights and solar street light poles for your project?

We, at Utkarsh India, offer designer lighting solutions that not only illuminate the area but also elevate the overall aesthetic appeal by magnifying the beauty of the landscape. Our designer lighting solutions poles are hot dip and come with decorative embellishments. Our wide range of street lighting solutions includes solar street light poles, steel tubular poles and high masts....

Be it big cities, small towns or villages, street fighting is essential everywhere. Street lighting makes the roads safer for motorists, pedestrians and others. Besides promoting safety, it also increases the quality of life by extending the day. If you are an infrastructure and EPC contractor planning to buy, here we, as a reputed street light manufacturer in India, have curated some FAQs on street lighting and their answers that you will find useful:

 

Question 1: Which type of lighting is used for street lights?

High Pressure Sodium (HPS) lamps are the most commonly used bulbs for street lighting. They produce white light and are preferred because they are low maintenance. Metal halide light bulbs are also popular as they emit true white light. This makes it suitable for sports fields and stadiums. HPS and metal halide lamps are more preferred over mercury lamps as the latter is hazardous. 

 

Question 2: Are all street lights the same height?

The street lamp’s height is usually 6 meters, 8 meters, 10 meters, 12 meters, or 15 meters. The street light height is decided by the breadth of the road surface.

As one of the reputed street lamp post suppliers, we can custom-engineer street and road lighting solutions of different styles, heights and materials to meet your specific requirement.

Question 3: What are the factors that determine the height of the street light poles?

Here are some factors that need to be considered when determining the height of street light poles:

1. Width of the road: The width of the area illuminated is equal to the height of the street light. A road that is 5 meters wide needs a 5 meters high pole.
2. Vehicle density: The lamp's height is also decided by the vehicle density on the road and the kind of vehicle passing. For heavy vehicle routes, high-end street lights are needed. For light vehicle routes, low-level street lights are installed. 
3. Spacing between street lights: The distance between street light poles should be 3-4 times the height of the poles.

Question 4: How to choose a street light?
When selecting a street light, consider the following options:

1. Mounts: Street lights are available in different mounts such as pole mounted fixtures and slipfitter and trunnion mount models.
2. Lumens: The more lumens, the brighter the light source is. You should consider how much light you need for the end use.
3. Wattage : Wattage is the measure of how much energy a bulb consumes. Energy-efficient bulbs such as LED lamps use less energy to give off the same amount of brightness (lumens). As LED lamps are brighter and consume less energy, they are often preferred over incandescent and fluorescent lamps.
4. Durability:  Street lights are often exposed to extreme weather conditions, and, therefore, it is important to select on the basis of wind testing rating.  

Looking for street lamp post suppliers? 

As one of the reputed street lamp post suppliers, we offer a wide range of standard and custom-engineered street and road lighting solutions such as light poles, steel tubular poles, high mast light towers and lamp posts. The masts are hot dip galvanized for long-lasting life. Our products have a minimum design life of 25 years.

...

We live in the age of Automationand Artificial Intelligence. Whatever electronics we buy, we demand it withhigh energy or long-lasting battery backup. When it comes to energy, solar issomething which strikes our mind as it is the most sustainable poweralternative. According to Allied Market Research, the solar energy marketaccounted for $52.5 billion and is estimated that it will reach $223.3 billionby 2026.

Why Solar Energy? A Readily Available Renewable Resource

The Sun emits enough power ontoEarth to satisfy all the human energy demand. Solar energy is a kind of energywhich is readily available and renewable, and that is why it is an attractivesource of energy. During the early times, solar energy harvesting has been quiteexpensive and relatively inefficient. But with the advancement of technologiesin the last two decades, has increased the usage of solar energy in thisgeneration by decreasing the costs and increasing solar panel efficiency.

The use of solar energy has comea long way now. This year, the world has witnessed more than 115 Gigawatts ofsolar installation across the globe, which is quite more than all othergeneration technologies combined together. In the next few years, technologicalimprovements will ensure that solar power becomes cheaper than ever. It ispredicted that by 2030, solar will become the most important source of energyfor the production of electricity in many parts of the world.

The recent surge in the demand ofsolar panel installation in rooftop and rapid adoption in the architectural the field is the significant drivers which have led to the rise in demand for solarcells. Moreover, recent technological advancements have significantly boostedthe adoption of solar panels in order to generate electricity.

With the increase in the demand forsolar cells, we can expect a tremendous increase in the use of solar panels inthe future. It can capture more light and transform the light energy intoelectricity. The consumers, as well as producers, are more likely to adoptsolar energy if it produces the kind of energy which is equal to othernon-renewable resources. This will also have a positive impact on theenvironment and climate change.

Given the fact that solar panelis so easy and quick to install and also flexible. It can be used to powersomething as small as a toy or as large as a city. Solar energy has a brightfuture and solar installations will continue to grow over the coming decade.

Conclusion:

At Utkarsh, we understand the essence of renewable resource solutions through which a sustainable approach ineveryday living can be adopted. Utkarsh India, being the leaders in solarlighting, offer street light poles with mounts for solar panels that areengineered as per your customization.  

...