HEIGHT: 10Mtr TO 45Mtr
HTICKNESS: 3mm to 8mm
DIAMETER: Up to 960mm
BASE PLATE DIAMETER: 1180mm
WIND SPEED: Up to 300 km/hour
Shaft– High tensile sheet/Plate Equivalent to BSEN 10025 : 2004 / IS 2062 : 2011 Gr.E350BR / IS 5986 : 2011 Gr 355, Base Plate- As per IS 2062 : 2011 Gr.E250A, Foundation Bolt- IS 1367 : 1994 / IS 2062 : 2011 Gr.E250A
As Per IS 4759 : 1996 / IS 2629 : 1985 / BSEN ISO 1461 : 2009
As per IS 875 (Part-3):2015/As per customer requirement
As Per IS 875 Part-3:2015, IS 800 : 2007 / IS 6533:1989 (P-2) / BS 5649 : 1985 / EN 40, ILE TR-7:2000.
As per IS 10178 : 1995/ IS 9595 : 1996
DESIGN SAFETY FACTOR
As per ILE TR 7:2000.
Motor: As per IS 325 :1996 (3PH A.C., 415V, 4/6 Pole, 1HP to 3HP)
Winch: 350KGS, 500 KGS, 750 KGS (SGDD/DGDD) & 1500 KGS (DGDD).
Wire Rope: Stainless Steel 6MM, 8MM, AISI 316, 7/19 Construction.
Trilling Cable: As per IS 9968/P-1:1988 [ 2.5sq 5/8core, 4sq 5/8core, EPR Insulated, PCP Sheathed.
Wiring Cable: As per IS 694:1990
Pulley: LM 6 with Self- lubricating PB bush.
Hardware: Stainless Steel
Feeder Pillar Box: As per customer requirement
Tolerances: As per BS 5649 : 1978/EN 40, IS 1852: 1985
- In house Design facilities (Structural & Foundation) with PLS/Special software (Validate from IIT-Kharagpur)
- Available both in three point and two point suspension.
- Electroplated rope drum, sprocket and torque limiter which do not rust.
- Rope drum of winch have one left hand and other right hand groove for better alignment of ring.
- Available both Detachable arm and fixed arm Lantern Ring.
- Seven tanks and zero discharge galvanizing process with Flux tank heated by superheated steam for better Adhesion of zinc coating.
- All testing facility available in plant including Spectrometer for chemical analysis.
- All Trailing cables confirm to IS 9968 (P-1) for safety and durability.
- All the hardware supplied are stainless steel for better life.
- Our head frame have stainless steel axle with anti rotation clamp to prevent damage of axle and stainless steel guide roller for smooth rolling of cable and rope.
- Heavy duty drive chain (1/2 inch pitch) for lifting the ring.
- We provide safety locking rope for high mast safety.
- We provide double safety protection of motor (one mechanical and one electrical)
- Optionally we provide anti thief nut for foundation bolt with specially developed wrench for High mast.
- Can provide both PVC and HDPE buffer arrangement for Lantern Ring.
- All winch & Motor tested with proper load before dispatch.
- Structural Design is checked for all orders before production.
- Wind Tunnel test from IIT-Kanpur.